Model:WSME-D/DS/DSZ 315/500

Inverted automatic wire feeding AC/DC pulse argon arc welding machine

Inverted automatic wire feeding AC/DC pulse argon arc welding machine

Functions:
AC constant current TIG, AC pulse TIG, DC constant current TIG, AC pulse TIG, manual mental arc welding.

Application industry:
Aerospace, space division, petrochemical industry, heat exchanger, aluminum furniture and bicycle light.

Features:
◆ The operation panel with reasonable layout, rich functions and convenient operation;

◆ The welding parameter can be preset precisely;

◆ The AC frequency and cleaning width can be adjusted independently to meet the needs of welding process for different aluminium products;

◆ It has easy arc strike, stable electric arc and easily controlled weld pool;

◆ The argon arc welding can protect the welding gun from water depletion;

◆ The welding current can be controlled afar;

◆ The weld penetration and weld width required by the weld joint and the number of waveform can be obtained through the adjustment of the pulse current, impulse frequency, duty ratio, alternating current, AC frequency, cleaning proportion and AC bias ratio when the AC argon arc welding is used to prolong the service life, specially applicable to the automatic welding and robot welding.

◆ The built-in strong wire feed system has a rich function menus of wire feeding, which can meet different process requirement;

◆ The wire feed speed automatically matches with the pulse current, which is convenient for the adjustment;

◆ Multi-waveforms are provided for selection, including the standard square wave, nonstandard square wave, sine wave, triangular wave and mixed wave.

 

Technical parameters

Model WSME-315D/DS WSME-500D/DS
Rated input voltage / frequency Three-phase 380V(+ / -)10% 50Hz
Rated input capacity (KVA) 12.1 25.7
Rated input current (A) 18.5 39
Rated load sustainability (%) DC100 /AC60 DC100 /AC60
Output no-load voltage (V) 63 79
Output current range (A) 5~315 10~500
Arc starting current (A) 10~315 10~500
Peak current (A) 5~315 10~500
Arc stopping current (A) 5~315 10~500
Time of current-increasing (S) 0.1~10
Time of current-decreasing (S) 0.1~15
Pre-flow time (S) 0.1~15
Lagging time of gas-stopping (S) 0.1~20
Pulse frequency (Hz) AC0.2~250 / DC0.2~1000
Pulse duty (%) 1~100%
AC frequency (Hz) 20~250
Adjustment of cleaning area (%) -40~40
TIG pilot arc style HF arc
Cooling mode Water cooling
Shell protection grade IP21S
Insulation grade H/B

Other products